EZ SCADA is a small, economical, SCADA or wireless Telemetry communication system featuring easy to use and install hardware.

EZ SCADA for small systems

EZ SCADA.

Northern Data Systems, Inc. proudly presents EZ SCADA . EZ SCADA is an economical, SCADA or Telemetry communication system that exchanges the status of 2, 4, or 8 dry contact and analog inputs, and 2, 4, or 8 contact and analog outputs. All signals are bi-directional, using a license free 2.4 GHz radio band, so that data may be read from the remote station and sent to it. The license-free, spread-spectrum radio technology allows small systems to be set up with very little effort and low cost!!!

Wireless Telemetry A simple telemetry system may consist of just two devices: a local host and a remote unit. However, many times there may be several remote sites that have data to be exchanged with a single host site. This setup is referred to as a host-to-multipoint system. Signals can be exchanged with all remotes in both directions just like in a point-to-point system.

Features and benefits include: Point to point or host to multipoint systems. No Computer required Inputs at one site become outputs at the other site (Copycat Feature) No Calibration required Microprocessor controlled for high accuracy No telephone leased lines required Quick start-up No programming No FCC license required Battery back-up

This is the perfect solution for wells, tanks, and other small systems where hard wiring or telephone lines are difficult or costly.

Models

EZ-22  (2 Dry Contact and 2 Analog Inputs with 2 Relay Contact and 2 Analog Outputs)        $2495 each

EZ-44  (4 Dry Contact and 4 Analog Inputs with 4 Relay Contact and 4 Analog Outputs)        $2995 each

EZ-88  (8 Dry Contact and 8 Analog Inputs with 8 Relay Contact and 8 Analog Outputs)        $3495 each

HOME | EZ Installation | EZ Spec Sheet | Contact us | NDS EZ SCADA Main page

EZ SCADA.com

Tel: (856) 235-7272
Sales Department email: nordatasys@aol.com

© 1992-2005, Northern Data Systems, Inc.